CCS Euro Foam Hand Polish Applicators
The CCS Euro Foam Polish Applicators allow you to match polishes to the appropriate foam variety, just as you’d do if you were applying the products with a polisher. Now you can get better results by hand because the applicator is enhancing the performance of the product. Work smarter with CCS Euro Foam Hand Polish Applicators!
These imported foam applicators utilize CCS Technology™, just like machine buffing pads. CCS pockets, as you can see in the photo, cover one side of each applicator. The pockets create spaces for excess polish to accumulate – without soaking into the foam – until it is needed on the work surface. Then the polish is drawn up through the center dimples of each CCS pocket and onto the applicator’s work surface. This design saves product because the CCS pockets significantly reduce product absorption.
The Euro Foam Hand Polish Applicators are available in these foam types:
Cutting Applicator – The orange foam is the most popular type of
foam used in making buffing pads. It has a texture like memory foam but
denser. It can be used to remove light to moderate swirls with little or no
loss of surface gloss. Use a light swirl remover, such as XMT Ultra Fine
Swirl Remover 1 or XMT Fine Swirl Remover 2. In most cases, you can go
straight to wax application with the red applicator. Use the orange pad for
spot correction or on the entire vehicle.
Applicator – For general polishing and pre-wax cleaning, we
recommend the white polishing foam. This is one of the most versatile foam
compositions. Use it to apply finishing polishes, pre-wax cleaners, and all
in one products, for example Pinnacle Paintwork Cleansing Lotion or Klasse
All In One. The foam is less dense than the orange pad. It has just enough
density to help clean and polish the paint, but it will not produce haze.
|Red Ultra Soft
Finishing Applicator – The red foam is designed specifically for
the application of waxes, sealants, and glazes. It has no cut or cleaning
ability. The soft foam will not leave any haze and it is gentle on all
automotive surfaces. Use the red foam applicator with any last step product
to product a smooth, flawless finish.
Gold Jewelling Applicator - Use the gold pad to apply a very fine polish or glaze as the final step of the polishing process. Jewelling is the term coined for this step because it intensifies gloss and reflectivity, like a jewel. The gold foam pad also works well for wax and sealant application.
Wash applicators with Wolfgang Polishing Pad Rejuvenator after every use. Rinse and air dry. The concentrated cleaner will release products from the foam’s cells and eliminate residue.
If you prefer to detail by hand, now you can match your applicator to the product, just as if you were machine detailing. CCS Euro Foam Hand Polish Applicators make hand detailing more efficient and more effective than ever before!
6 x 3.75 x 1.25 inches
Fast, friendly service. Highest quality products available anywhere! Completely satisfied I recommend Wolfgang. There was no put on hold to speak to knowledgeable Sales Rep for advice who understood clearly what is in their complete product line and was very helpful. Truly German American Technology at it's finest. Thanks Wolfgang - Jay, G.