||Porter Cable 7424XP
Variable Speed Polisher
The Porter Cable 7424XP Dual Action Polisher is a beefed up, more powerful version of our most popular dual action polisher. The Porter Cable 7424XP Dual Action Polisher has all the user-friendly features of the original Porter Cable 7424XP, but a 4.5 amp motor enables enhanced performance and durability. The Porter Cable 7424XP Dual Action Polisher operates from 2,500 OPM to 6,800 OPM to provide a faster removal rate. The 7424XP features all ball and roller bearing construction with spiral/bevel gears and an improved switch design. The buffer accepts a 5/16-24 spindle thread. The pad diameter is 6 inches. The polisher includes a wrench, side handle, polishing pad, and a operating manual.
||Dual Action 5 Inch HD Hook & Loop Backing Plate
Constructed of flexible urethane, this 5 inch backing plate has hook and loop material permanently secured from edge to edge. A recessed edge protects the paint from impact and the post is made of durable stainless steel. The 5/16 inch thread fits any dual action polisher with a corresponding thread. A 5 inch backing plate is recommended for 6.5 inch pads in order to provide a generous margin of error. Should you tilt the polisher or cut in too close to mirrors, the backing plate will not strike the paint.
||2 Microfiber Detailing Towels, 16 x 16 inches
These versatile microfiber towels are great for any variety of detailing tasks, from general washing and scrubbing off road contaminants, to applying and buffing off wax and all-in-one protectants. All the Cobra Detailing Towels boast an 80/20 polyester/polyamide blend in a special “feather” weave that increases their absorption properties, guaranteeing high performance and durability.
Pinnacle XMT Polishing Foam Pad Cleaner
Pinnacle XMT Polishing Pad Cleaner contains a degreasing agent that breaks
up oil and eliminates every last trace of residue. Soap (as in dish soap)
can leave a residue of its own, so there is no soap in this cleaner. Intense
cleaners and degreasers break up oily deposits left by car care products so
the pad rinses completely clean. This pad cleaner is ready to use in a
convenient pump spray bottle.
Pinnacle XMT Polishing Foam Pad Conditioner
Prevention of dry buffing is as easy as misting an unused pad with Pinnacle
XMT Polishing Pad Conditioner. It only takes a couple of spritzes to prep
the pad for polishing. The rich lubricants instantly penetrate the pad,
softening and conditioning the material. Even if the pad has never been
used, it will glide across the paint like you’re halfway through the detail
Porter Cable 7424XP Wrench & 1
The Flat Porter Cable Wrench is use for installing and removing the
OEM polishing pad, backing plates, brushes, and the different accessories that are available for the
Porter Cable 7424XP dual-action polisher. The Counterweight is the part that
causes the plate to spin. The semi-circular weight spins with your
backing plate to balance out any irregular motion and make the Porter Cable operate more smoothly.
Cutting Foams 6.5"- Use this pad to apply compounds or polishes
to remove severe oxidation, swirls, and scratches. It is the most aggressive
and should only be used on oxidized and older finishes. Always follow this
pad with an orange or white pad and a fine polish to refine the
paint until it is smooth.
Light Cutting Foam 6.5"- Firm, high density foam for scratch and
defect removal. Use this pad with polishes and swirl removers. It’s an all
around pad that will work on most light to moderate imperfections.
Pink Cutting/Polishing Foam 6.5"- This foam is of medium density with the
ability to level very fine scratches and very light oxidation. Use light
swirl removers with this pad. Coarse Green has been replaced with Pink
Polishing Foam 6.5"- Less dense foam formula for the
application of waxes, micro-fine polishes and sealants. This pad has very
light cutting power so its perfect for pre-wax cleaners.
Polishing/Finishing Foam 6.5" - Use this foam
to apply one-step cleaner waxes. It is a balance of polishing and finishing
that is perfect for all-in-one product application.
Finishing Foam 6.5" - Composition is firm enough to withstand
added pressure during final finishing to remove buffer swirls. It has no cut
and will apply thin, even coats of waxes, sealants, and glazes.
Finessing Foam 6.5” – This blue foam pad has soft composition for applying glaze, finishing polish,
sealants, and liquid waxes. The soft pad has no cut, making it perfect for applying nonabrasive products evenly.
CCS Red Ultrasoft Wax/Sealant Foam 6.5" - This soft, imported foam is ideal for applying the final coat of wax or sealant. The foam works especially well when applying liquid waxes or sealants because it is firm enough to keep the majority of the product on the paint, rather than soaking it up. The red foam has no cut or cleaning ability.
CCS Super Soft Gold Jewelling Foam Pad 6.5" - The CCS Super Soft Gold Jewelling Pad is made of Lake Country's softest foam. Use the gold pad to apply a very fine polish or glaze as the final step of the polishing process. Jewelling is the term coined for this step because it intensifies gloss and reflectivity, like a jewel. The gold foam pad also works well for wax and sealant application.