Wolfgang Total Swirl
Remover 3.0 is a hybrid of our original Total Swirl Remover formula and
Menzerna’s fast-cutting polish for ceramic clear coats. It combines
Wolfgang’s diminishing abrasive technology with Menzerna’s special milling
process, which produces consistently sized, fast cutting abrasives.
Most heavy-cut swirl
removers work by leveling the edges of scratches with large abrasives. The
large scratches are replaced with smaller scratches caused by the abrasives.
The next swirl remover will have smaller abrasives to remove these
scratches. After that, you’ll need a finishing polish.
 Wolfgang Total Swirl Remover 3.0 fuses
Wolfgang and Menzerna technology into one multi-purpose swirl remover.
Wolfgang Total Swirl
Remover 3.0 takes a direct route to a perfect finish. Our specially
milled abrasives, developed by Menzerna of Germany, work to eliminate
imperfections without creating new ones. These small abrasives are
milled for consistency. As they smooth over a scratch, the abrasives
diminish at the same rate because they all started at the same size. The
result is smooth paint in fewer steps.
If another step is
needed to fully restore the gloss, simply switch to a softer foam pad. Wolfgang Total Swirl Remover 3.0 works more or less aggressively based on
your pad selection. If you need aggressive swirl and oxidation removal,
use a cutting or light cutting pad. If you need minor swirl removal, use a
polishing pad. Wolfgang Total Swirl Remover 3.0 works with your pad of
choice to give you the best results.
Wolfgang Total Swirl Remover 3.0 can be used with a dual action polisher to remove moderate swirls and imperfections.
Wolfgang Total Swirl
Remover 3.0 works on all types of paint, including today’s ceramic clear
coats. This type of paint is much
harder than a conventional clear coat, which can make it tough to correct.
Wolfgang Total Swirl Remover 3.0 delivers excellent results on
scratch-resistant clear coats. A high concentration of German abrasives,
combined with Wolfgang’s lubricant-rich formula, provide Wolfgang Total
Swirl Remover 3.0 with excellent leveling ability. All types of paint can
be successfully and flawlessly corrected with Wolfgang Total Swirl Remover
3.0.
Wolfgang Total Swirl
Remover 3.0 is designed to deliver maximum performance in an easy-to-use
formula. The water-based polish is low-dusting, silicone-free, and
wax-free. With no fillers, you can monitor your progress. Menzerna’s
polishes are developed for auto production so every polish they make is
suitable for a body shop environment.
Wolfgang Total Swirl
Remover 3.0 can be applied with a dual action or a rotary (circular)
polisher. The polish will cut quickly when applied with a rotary polisher,
which makes it easier to correct hard, ceramic clear coats. However, there
is enough lubrication to afford Wolfgang Total Swirl Remover 3.0 a longer
working time with a dual action polisher. This versatility makes Wolfgang
Total Swirl Remover 3.0 an ideal choice for detailers of all skill levels.
One polish can do it
all. Wolfgang Total Swirl Remover 3.0 cuts like a light duty compound but
finishes like a polish. Remove 2000 grit scratches, oxidation, and swirls on
any type of paint, and leave a smooth, wax-ready finish.
Wolfgang Total Swirl
Remover 3.0
- Made by Menzerna
- Diminishing Abrasive Technology
- Milled and processed by Menzerna
- Low-dusting, easy clean-up
- Water-based
- No fillers, wax or silicones
- Removes 2000 grit sanding scratches
- Effective on conventional and
ceramic clear coats
32 oz. |
Machine Application:
- Clean and dry the vehicle. Apply Wolfgang Total Swirl Remover 3.0
out of direct sunlight.
- Depending on the condition of the paint, choose a polishing or light
cutting pad. (Only step up to the cutting foam if the light cutting foam
does not work.) Apply a bead of Wolfgang Total Swirl Remover 3.0 to the
vehicle or to the pad. With the polisher turned off, spread the polish over about a 2 x
2 sq. ft. area.
- Polish at 1200-1800 RPM (5 or 6 on a dual action polisher) working
slowly across and then up and down the area. Check your work after several
passes to see if the defect has been removed. If so, reduce the pressure
and continue buffing until a high gloss is achieved. If the pad becomes
dry, mist it with water and continue buffing.
- Wipe the polished area with a damp microfiber cloth.
- If necessary, follow with Wolfgang Finishing Glaze 3.0 to
completely restore the gloss.
- Always apply a wax or sealant after compounding or polishing. Wolfgang Deep Gloss Paint Sealant 3.0seals in the shine with its
long-lasting polymer formula. Wolfgang Füzion Wax is a blend of
carnauba wax and polymers that offers long-term protection with a
traditional paste wax feel.
 Pour a bead of Wolfgang Total Swirl Remover 3.0 onto a light cutting pad.
 With the polisher turned off, spread the polish
over a 2 x 2 sq. ft. section of paint.
 Turn the polisher at a speed of 5 or 6 and work side to side, then up and down.
 Buff away residue with a Cobra Teal Edgeless Microfiber Polishing Cloth.
 You can also use a rotary polisher to apply Wolfgang Total Swirl Remover 3.0. Set the max speed between 1200-1800 rpm.
 Wolfgang Total Swirl Remover works well with the Edge 2000 System (shown here) and the Lake Country pads.
 You can use different pads to adjust the cut of Wolfgang Total Swirl Remover 3.0.
|
