Wolfgang Finishing Glaze 3.0 is a water-based emulsion with ultra
fine diminishing abrasives that gently polish the paint to a brilliant
gloss. Compounding swirls, mild oxidation, and water spots disappear to
reveal glassy smooth, beautiful paint. Underneath a wax or sealant, the
paint radiates with energy and gloss.
Wolfgang Finishing Glaze 3.0 is gentle
enough to use on new OEM paint finishes, yet it is highly effective on hard,
ceramic clear coats.
consistently sized abrasives have strength in numbers. The high
concentration of microscopic abrasives smooth minor imperfections in ceramic
paint and diminish to an ultra fine abrasive dust. Because these abrasives
are so small, they will not mar conventional, “softer” clear coats. You’ll
get consistently smooth, flawless results every time.
Glaze 3.0 is designed to deliver maximum performance in an easy-to-use
formula. The water-based polish is low-dusting, silicone-free,
filler-free, and wax-free.
Menzerna’s polishes are developed for auto
production so every polish they make is suitable for a body shop
Glaze 3.0 can be applied with a polisher or by hand. To remove compounding swirls and mild oxidation, we recommend using a
polisher. Apply by hand for shine enhancement. Use Wolfgang Finishing Glaze
3.0 after Wolfgang Total Swirl Remover 3.0 to restore maximum gloss,
especially on dark-colored vehicles. Then apply Wolfgang Deep Gloss Paint
Sealant or Wolfgang Füzion Estate Wax to protect the newly polished
Glaze 3.0 combines the shine enhancement of a glaze with the light paint
correction of a polish into one ultimate finishing product. For the maximum
gloss, don’t apply wax until you’ve applied Wolfgang Finishing Glaze 3.0.
- Made by Menzerna
- Diminishing Abrasive Technology
- Milled and processed by Menzerna
- Low-dusting, easy clean-up
- No fillers, wax or silicones
- Removes 2500 grit sanding scratches
- Effective on conventional and
ceramic clear coats
- Use after Wolfgang Total Swirl
Remover 3.0 to restore optimum gloss
- Mist the Wolfgang German Polish N Wax Applicator with Wolfgang
Instant Detail Spritz to moisten the foam. Apply a quarter size amount of
Wolfgang Finishing Glaze 3.0 to the applicator.
- Work in a back and forth, overlapping motion until the area starts
to dry. Wipe off the polish with a damp Cobra Microfiber Towel. Work in 2
x 2 sq. ft. sections until the entire vehicle is done
Note: Applying Wolfgang Finishing Glaze 3.0 by hand will enhance gloss but it will
not remove swirls. For paint correction, apply this product with a dual
action or rotary (circular) polisher.
- Clean and dry the vehicle. Apply Wolfgang Finishing Glaze 3.0 out of
- Use a soft foam finishing pad. Apply a bead of polish to the
vehicle. With the polisher turned off, spread the polish over about a 2 x
2 sq. ft. area.
- Polish at 1000-1200 RPM (4 to 4.5 on a dual action polisher) working
slowly across and then up and down the area. Check your work after several
passes to see if the defects have been removed. If so, reduce the pressure
and continue buffing until a high gloss is achieved. If the pad becomes
dry, mist it with Wolfgang Instant Detail Spritz and continue
- Wipe the polished area with a damp microfiber cloth.
- Always apply a wax or sealant after compounding or polishing. Wolfgang Deep Gloss Paint Sealant 3.0 seals in the shine with its
long-lasting polymer formula. Wolfgang Füzion Estate Wax is a
blend of carnauba wax and polymers that offers supreme protection with a
traditional paste wax feel.
Pour a bead of Wolfgang Finishing Glaze 3.0 onto a polishing pad.
With the polisher turned off, spread the polish over a 2 x 2 sq. ft. section of paint.
Turn the polisher at a speed of 5 or 6 and work side to side, then up and down.
Buff away residue with a Cobra Teal Edgeless Microfiber Polishing Cloth.
You can also use a rotary polisher to apply Wolfgang Finishing Glaze 3.0. Set the max speed between 1000-1200 rpm.