Cover your vehicle in a blizzard of light, fluffy foam!
The Wolfgang Tornador Air Foamer HP turns your favorite car shampoo into super thick, long-lasting foam. This air-driven foam gun works with your air compressor to produce frothy, rich foam that has amazing cling. The Wolfgang Tornador Air Foamer HP foam gun can be used for interior or exterior detailing. Use it with a carpet cleaner or with auto shampoo to spray a snow storm of foam!
The Wolfgang Tornador Air Foamer HP Foam Gun will change how you wash your car. The Snow Gun uses the air pressure from an air compressor to convert shampoo or any foamy product into unbelievable foam. The suds are so light and fluffy, they cling to vertical surfaces without running off.
When washing your vehicle, do you feel you don’t have adequate lubrication or cleaning power because the suds run off the paint? You’ll never experience that with the Wolfgang Tornador Air Foamer HP Foam Gun. The Snow Gun allows you to presoak the vehicle with clinging foam. The foam stays where it’s sprayed. As you wash the vehicle, there is a layer of light foam between your mitt and the paint. With the Tornador “Snow Gun” your shampoo foam won’t fall flat.
The Wolfgang Tornador Air Foamer HP Foam Gun only works with an air compressor capable of producing 60-90 psi of air pressure. The higher the air pressure, the greater the foam generated by the Snow Gun. The unique barrel on the Snow Gun mixes the shampoo and pressurized air to create a blizzard of foam. You’ll be amazed!
The amount of foam is regulated by a pressure valve on the gun. Use as little or as much foam as you need.
The Wolfgang Tornador Air Foamer HP Foam Gun can be used with any foaming cleaner, such as car shampoos, carpet and upholstery cleaners, and non-acidic wheel cleaners. Please note: Thoroughly flush all parts of the foam gun with water between uses to prevent cross-contamination of vehicle surfaces. The best rule of thumb is to use different foam guns for different parts of the vehicle.
Interior shampoos and car wash soaps can be diluted per the manufacturers’ instructions prior to adding them to the Tornador’s reservoir.
The Wolfgang Tornador Air Foamer HP Foam Gun includes the gun itself with the 30 oz. jar and an extra cap for the jar. You will need an air compressor to use the Tornador. To use the Tornador “Snow Gun” Foam Gun for car washing, start by rinsing down the vehicle with a water hose. Mix the desired shampoo with water as directed on the product’s label. Attach the nozzle to the jar tightly and attach the gun to the air compressor. Turn the air compressor on and coat the vehicle with foam. Turn off the air compressor and agitate vehicle with a sponge or mitt. Rinse with your water hose!
To use the Wolfgang Tornador Air Foamer HP Foam Gun for interior carpet and fabric cleaning, dilute a concentrated interior cleaner per the label directions. Spray the carpet and seats with foam and use a brush to agitate the area. Then towel dry and vacuum.
Two fittings are included that attach to the diffuser cap:
Narrow Nozzle - designed to apply upholstery shampoo between seats, kick panels, seat rails - areas where you do not want a lot of foam.
Wide Nozzle – great for using on exterior of vehicle and provides more concentrated strip of product that will cling better. More concentrated strip means less splatter and wasted product.
The Wolfgang Tornador Air Foamer HP Foam Gun turns any concentrated, surfactant cleaner into amazing foam that coats and clings to automotive surfaces. This isn’t just a foam gun – it’s a Snow Gun!
For optimal performance, the Wolfgang Tornador Air Foamer HP works best with an air compressor that produces 5 CFM or more at 90 psi.
30 oz. reservoir
You May Also Like
Fast, friendly service. Highest quality products available anywhere! Completely satisfied I recommend Wolfgang. There was no put on hold to speak to knowledgeable Sales Rep for advice who understood clearly what is in their complete product line and was very helpful. Truly German American Technology at it's finest. Thanks Wolfgang